Referencia de API para desarrolladores

Empezando

Autenticación

Límite de tarifa

Manejo de respuestas

Referencia de API para desarrolladores v3

Empezando

Se requiere una clave API para que el sistema procese las solicitudes. Una vez que un usuario se registra, se genera automáticamente una clave API para este usuario. La clave API debe enviarse con cada solicitud (consulte el ejemplo completo a continuación). Si la clave API no se envía o está caducada, habrá un error. Asegúrese de mantener en secreto su clave API para evitar abusos.

Autenticación

Para autenticarse con el sistema API, debe enviar su clave API como un token de autorización con cada solicitud. Puede ver el código de muestra a continuación.

cURL PHP Node.js

curl --location --request POST 'https://go2my.info/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
    "Authorization: Bearer YOURAPIKEY",
    "Content-Type: application/json",
    ),
));

$response = curl_exec($curl);

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://go2my.info/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: ''
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Límite de tarifa

Nuestra API tiene un limitador de velocidad para protegerse contra picos en las solicitudes para maximizar su estabilidad. Nuestro limitador de frecuencia actualmente tiene un límite de 30 solicitudes por 1 minuto.

Se enviarán varios encabezados junto con la respuesta y estos se pueden examinar para determinar información diversa sobre la solicitud.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP

Manejo de respuestas

Todas las respuestas de la API se devuelven en formato JSON de forma predeterminada. Para convertir esto en datos utilizables, será necesario utilizar la función adecuada según el idioma. En PHP, la función json_decode() se puede usar para convertir los datos en un objeto (predeterminado) o en una matriz (establezca el segundo parámetro en verdadero). Es muy importante verificar la clave de error ya que proporciona información sobre si hubo un error o no. También puede consultar el código de cabecera.

{
    "error": 1,
    "message": "An error ocurred"
}

Campañas

List Campaigns

GET https://go2my.info/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/campaigns?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}

Crear una campaña

POST https://go2my.info/api/campaign/add

A campaign can be added using this endpoint.

Parámetro	Descripción
name	(optional) Campaign name
slug	(optional) Rotator Slug
public	(optional) Access

cURL PHP Node.js

curl --location --request POST 'https://go2my.info/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Campaign',
  'slug' => 'new-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://go2my.info/api/campaign/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}

Assign a Link to a Campaign

POST https://go2my.info/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

cURL PHP Node.js

curl --location --request POST 'https://go2my.info/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://go2my.info/api/campaign/:campaignid/assign/:linkid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Link successfully added to the campaign."
}

Actualizar campaña

PUT https://go2my.info/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
name	(required) Campaign name
slug	(optional) Rotator Slug
public	(optional) Access

cURL PHP Node.js

curl --location --request PUT 'https://go2my.info/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Twitter Campaign',
  'slug' => 'twitter-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://go2my.info/api/campaign/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}

Delete Campaign

DELETE https://go2my.info/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://go2my.info/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://go2my.info/api/campaign/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

Canales

List Channels

GET https://go2my.info/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/channels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}

List Channel Items

GET https://go2my.info/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/channel/:id?limit=1&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/go2my.info\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/go2my.info\/mybio",
                "link": "https:\/\/go2my.info\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}

Crear un canal

POST https://go2my.info/api/channel/add

A channel can be added using this endpoint.

Parámetro	Descripción
name	(required) Channel name
description	(optional) Channel description
color	(optional) Channel badge color (HEX)
starred	(optional) Star the channel or not (true or false)

cURL PHP Node.js

curl --location --request POST 'https://go2my.info/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Channel',
  'description' => 'my new channel',
  'color' => '#000000',
  'starred' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://go2my.info/api/channel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}

Assign an Item to a Channel

POST https://go2my.info/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

Parámetro	Descripción
:channelid	(required) Channel ID
:type	(required) links or bio or qr
:itemid	(required) Item ID

cURL PHP Node.js

curl --location --request POST 'https://go2my.info/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://go2my.info/api/channel/:channelid/assign/:type/:itemid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Item successfully added to the channel."
}

Actualizar canal

PUT https://go2my.info/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
name	(optional) Channel name
description	(optional) Channel description
color	(optional) Channel badge color (HEX)
starred	(optional) Star the channel or not (true or false)

cURL PHP Node.js

curl --location --request PUT 'https://go2my.info/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Acme Corp',
  'description' => 'channel for items for Acme Corp',
  'color' => '#FFFFFF',
  'starred' => false,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://go2my.info/api/channel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Channel has been updated successfully."
}

Delete Channel

DELETE https://go2my.info/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

cURL PHP Node.js

curl --location --request DELETE 'https://go2my.info/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://go2my.info/api/channel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

Cuenta

Obtener cuenta

GET https://go2my.info/api/account

Para obtener información sobre la cuenta, puede enviar una solicitud a este punto final y devolverá datos sobre la cuenta.

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "data": {
        "id": 1,
        "email": "sample@domain.com",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}

Actualizar cuenta

PUT https://go2my.info/api/account/update

Para actualizar la información de la cuenta, puede enviar una solicitud a este punto final y actualizará los datos de la cuenta.

cURL PHP Node.js

curl --location --request PUT 'https://go2my.info/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "newemail@google.com",
    "password": "newpassword"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'email' => 'newemail@google.com',
  'password' => 'newpassword',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://go2my.info/api/account/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "email": "newemail@google.com",
    "password": "newpassword"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Account has been successfully updated."
}

Códigos QR

List QR codes

GET https://go2my.info/api/qr?limit=2&page=1

Para obtener sus códigos QR a través de la API, puede usar este punto final. También puede filtrar datos (Ver tabla para más información).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/qr?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/go2my.info\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/go2my.info\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}

Obtenga un solo código QR

GET https://go2my.info/api/qr/:id

Para obtener detalles de un solo código QR a través de la API, puede usar este punto final.

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/qr/:id',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/go2my.info\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}

Crear un código QR

POST https://go2my.info/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
type	(required) text \| vcard \| link \| email \| phone \| sms \| wifi
data	(required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background	(optional) RGB color e.g. rgb(255,255,255)
foreground	(optional) RGB color e.g. rgb(0,0,0)
logo	(optional) Path to the logo either png or jpg

cURL PHP Node.js

curl --location --request POST 'https://go2my.info/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://go2my.info/api/qr/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "link": "https:\/\/go2my.info\/qr\/a58f79"
}

Update QR Code

PUT https://go2my.info/api/qr/:id/update

Para actualizar un código QR, debe enviar datos válidos en JSON a través de una solicitud PUT. Los datos deben enviarse como el cuerpo sin procesar de su solicitud, como se muestra a continuación. El siguiente ejemplo muestra todos los parámetros que puede enviar, pero no es necesario que los envíe todos (consulte la tabla para obtener más información).

Parámetro	Descripción
data	(required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background	(optional) RGB color e.g. rgb(255,255,255)
foreground	(optional) RGB color e.g. rgb(0,0,0)
logo	(optional) Path to the logo either png or jpg

cURL PHP Node.js

curl --location --request PUT 'https://go2my.info/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://go2my.info/api/qr/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "QR has been updated successfully."
}

Eliminar un código QR

DELETE https://go2my.info/api/qr/:id/delete

Para eliminar un código QR, debe enviar una solicitud de ELIMINACIÓN.

cURL PHP Node.js

curl --location --request DELETE 'https://go2my.info/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://go2my.info/api/qr/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

Dominios de marca

List Branded Domains

GET https://go2my.info/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/domains?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}

Create a Branded Domain

POST https://go2my.info/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

Parámetro	Descripción
domain	(required) Branded domain including http or https
redirectroot	(optional) Root redirect when someone visits your domain
redirect404	(optional) Custom 404 redirect

cURL PHP Node.js

curl --location --request POST 'https://go2my.info/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'domain' => 'https://domain1.com',
  'redirectroot' => 'https://rootdomain.com',
  'redirect404' => 'https://rootdomain.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://go2my.info/api/domain/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 1
}

Actualizar dominio

PUT https://go2my.info/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
redirectroot	(optional) Root redirect when someone visits your domain
redirect404	(optional) Custom 404 redirect

cURL PHP Node.js

curl --location --request PUT 'https://go2my.info/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'redirectroot' => 'https://rootdomain-new.com',
  'redirect404' => 'https://rootdomain-new.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://go2my.info/api/domain/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Domain has been updated successfully."
}

Delete Domain

DELETE https://go2my.info/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://go2my.info/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://go2my.info/api/domain/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

Enlaces

List Links

GET https://go2my.info/api/urls?limit=2&page=1&order=date

Para obtener sus enlaces a través de la API, puede usar este punto final. También puede filtrar datos (Ver tabla para más información).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request
order	(optional) Sort data between date or click
short	(optional) Search using the short url. Note that when you use the short parameter, all other parameters are ignored and if there is a match a Single Link response will be returned.
q	(optional) Search for links using a keyword

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/urls?limit=2&page=1&order=date' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/urls?limit=2&page=1&order=date",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/urls?limit=2&page=1&order=date',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "urls": [
            {
                "id": 2,
                "alias": "google",
                "shorturl": "https:\/\/go2my.info\/google",
                "longurl": "https:\/\/google.com",
                "clicks": 0,
                "title": "Google",
                "description": "",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "alias": "googlecanada",
                "shorturl": "https:\/\/go2my.info\/googlecanada",
                "longurl": "https:\/\/google.ca",
                "clicks": 0,
                "title": "Google Canada",
                "description": "",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}

Get a Single Link

GET https://go2my.info/api/url/:id

Para obtener detalles de un solo enlace a través de la API, puede usar este punto final.

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/url/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/url/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/url/:id',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 1,
    "details": {
        "id": 1,
        "shorturl": "https:\/\/go2my.info\/googlecanada",
        "longurl": "https:\/\/google.com",
        "title": "Google",
        "description": "",
        "location": {
            "canada": "https:\/\/google.ca",
            "united states": "https:\/\/google.us"
        },
        "device": {
            "iphone": "https:\/\/google.com",
            "android": "https:\/\/google.com"
        },
        "expiry": null,
        "date": "2020-11-10 18:01:43"
    },
    "data": {
        "clicks": 0,
        "uniqueClicks": 0,
        "topCountries": 0,
        "topReferrers": 0,
        "topBrowsers": 0,
        "topOs": 0,
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "google": 0
        }
    }
}

acortar un enlace

POST https://go2my.info/api/url/add

Para acortar un enlace, debe enviar datos válidos en JSON a través de una solicitud POST. Los datos deben enviarse como el cuerpo sin procesar de su solicitud, como se muestra a continuación. El siguiente ejemplo muestra todos los parámetros que puede enviar, pero no es necesario que los envíe todos (consulte la tabla para obtener más información).

Parámetro	Descripción
url	(required) Long URL to shorten.
custom	(optional) Custom alias instead of random alias.
type	(optional) Redirection type [direct, frame, splash], only id for custom splash page or overlay-id for cta pages
password	(optional) Password protection
domain	(optional) Custom Domain
expiry	(optional) Expiration for the link example 2021-09-28 23:11:16
geotarget	(optional) Geo targeting data
devicetarget	(optional) Device targeting data
languagetarget	(optional) Language targeting data
metatitle	(optional) Meta title
metadescription	(optional) Meta description
metaimage	(optional) Link to a jpg or png image
description	(optional) Note or description
pixels	(optional) Array of pixel ids
channel	(optional) Channel ID
campaign	(optional) Campaign ID
deeplink	(optional) Object containing app store links. When using this, it is important to set device targeting as well. (New) You can now set the parameter "auto" to true to automatically generate the deep links from provided long link.
status	(optional) public or private (default)

cURL PHP Node.js

curl --location --request POST 'https://go2my.info/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "url": "https:\/\/google.com",
    "status": "private",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "metatitle": "Not Google",
    "metadescription": "Not Google description",
    "metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
    "description": "For facebook",
    "pixels": [
        1,
        2,
        3,
        4
    ],
    "channel": 1,
    "campaign": 1,
    "deeplink": {
        "auto": true,
        "apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
        "google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
    },
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "languagetarget": [
        {
            "language": "en",
            "link": "https:\/\/google.com"
        },
        {
            "language": "fr",
            "link": "https:\/\/google.ca"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'url' => 'https://google.com',
  'status' => 'private',
  'custom' => 'google',
  'password' => 'mypass',
  'expiry' => '2020-11-11 12:00:00',
  'type' => 'splash',
  'metatitle' => 'Not Google',
  'metadescription' => 'Not Google description',
  'metaimage' => 'https://www.mozilla.org/media/protocol/img/logos/firefox/browser/og.4ad05d4125a5.png',
  'description' => 'For facebook',
  'pixels' => 
  array (
    0 => 1,
    1 => 2,
    2 => 3,
    3 => 4,
  ),
  'channel' => 1,
  'campaign' => 1,
  'deeplink' => 
  array (
    'auto' => true,
    'apple' => 'https://apps.apple.com/us/app/google/id284815942',
    'google' => 'https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US',
  ),
  'geotarget' => 
  array (
    0 => 
    array (
      'location' => 'Canada',
      'link' => 'https://google.ca',
    ),
    1 => 
    array (
      'location' => 'United States',
      'link' => 'https://google.us',
    ),
  ),
  'devicetarget' => 
  array (
    0 => 
    array (
      'device' => 'iPhone',
      'link' => 'https://google.com',
    ),
    1 => 
    array (
      'device' => 'Android',
      'link' => 'https://google.com',
    ),
  ),
  'languagetarget' => 
  array (
    0 => 
    array (
      'language' => 'en',
      'link' => 'https://google.com',
    ),
    1 => 
    array (
      'language' => 'fr',
      'link' => 'https://google.ca',
    ),
  ),
  'parameters' => 
  array (
    0 => 
    array (
      'name' => 'aff',
      'value' => '3',
    ),
    1 => 
    array (
      'device' => 'gtm_source',
      'link' => 'api',
    ),
  ),
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://go2my.info/api/url/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "url": "https:\/\/google.com",
    "status": "private",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "metatitle": "Not Google",
    "metadescription": "Not Google description",
    "metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
    "description": "For facebook",
    "pixels": [
        1,
        2,
        3,
        4
    ],
    "channel": 1,
    "campaign": 1,
    "deeplink": {
        "auto": true,
        "apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
        "google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
    },
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "languagetarget": [
        {
            "language": "en",
            "link": "https:\/\/google.com"
        },
        {
            "language": "fr",
            "link": "https:\/\/google.ca"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "shorturl": "https:\/\/go2my.info\/google"
}

Actualizar enlace

PUT https://go2my.info/api/url/:id/update

Para actualizar un enlace, debe enviar datos válidos en JSON a través de una solicitud PUT. Los datos deben enviarse como el cuerpo sin procesar de su solicitud, como se muestra a continuación. El siguiente ejemplo muestra todos los parámetros que puede enviar, pero no es necesario que los envíe todos (consulte la tabla para obtener más información).

Parámetro	Descripción
url	(required) Long URL to shorten.
custom	(optional) Custom alias instead of random alias.
type	(optional) Redirection type [direct, frame, splash]
password	(optional) Password protection
domain	(optional) Custom Domain
expiry	(optional) Expiration for the link example 2021-09-28 23:11:16
geotarget	(optional) Geo targeting data
devicetarget	(optional) Device targeting data
languagetarget	(optional) Language targeting data
metatitle	(optional) Meta title
metadescription	(optional) Meta description
metaimage	(optional) Link to a jpg or png image
pixels	(optional) Array of pixel ids
channel	(optional) Channel ID
campaign	(optional) Campaign ID
deeplink	(optional) Object containing app store links. When using this, it is important to set device targeting as well.

cURL PHP Node.js

curl --location --request PUT 'https://go2my.info/api/url/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "pixels": [
        1,
        2,
        3,
        4
    ],
    "channel": 1,
    "deeplink": {
        "apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
        "google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
    },
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/url/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'url' => 'https://google.com',
  'custom' => 'google',
  'password' => 'mypass',
  'expiry' => '2020-11-11 12:00:00',
  'type' => 'splash',
  'pixels' => 
  array (
    0 => 1,
    1 => 2,
    2 => 3,
    3 => 4,
  ),
  'channel' => 1,
  'deeplink' => 
  array (
    'apple' => 'https://apps.apple.com/us/app/google/id284815942',
    'google' => 'https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US',
  ),
  'geotarget' => 
  array (
    0 => 
    array (
      'location' => 'Canada',
      'link' => 'https://google.ca',
    ),
    1 => 
    array (
      'location' => 'United States',
      'link' => 'https://google.us',
    ),
  ),
  'devicetarget' => 
  array (
    0 => 
    array (
      'device' => 'iPhone',
      'link' => 'https://google.com',
    ),
    1 => 
    array (
      'device' => 'Android',
      'link' => 'https://google.com',
    ),
  ),
  'parameters' => 
  array (
    0 => 
    array (
      'name' => 'aff',
      'value' => '3',
    ),
    1 => 
    array (
      'device' => 'gtm_source',
      'link' => 'api',
    ),
  ),
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://go2my.info/api/url/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "url": "https:\/\/google.com",
    "custom": "google",
    "password": "mypass",
    "expiry": "2020-11-11 12:00:00",
    "type": "splash",
    "pixels": [
        1,
        2,
        3,
        4
    ],
    "channel": 1,
    "deeplink": {
        "apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
        "google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
    },
    "geotarget": [
        {
            "location": "Canada",
            "link": "https:\/\/google.ca"
        },
        {
            "location": "United States",
            "link": "https:\/\/google.us"
        }
    ],
    "devicetarget": [
        {
            "device": "iPhone",
            "link": "https:\/\/google.com"
        },
        {
            "device": "Android",
            "link": "https:\/\/google.com"
        }
    ],
    "parameters": [
        {
            "name": "aff",
            "value": "3"
        },
        {
            "device": "gtm_source",
            "link": "api"
        }
    ]
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 3,
    "short": "https:\/\/go2my.info\/google"
}

Eliminar un enlace

DELETE https://go2my.info/api/url/:id/delete

Para eliminar un enlace, debe enviar una solicitud de ELIMINACIÓN.

cURL PHP Node.js

curl --location --request DELETE 'https://go2my.info/api/url/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/url/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://go2my.info/api/url/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Link has been deleted successfully"
}

Files

List Files

GET https://go2my.info/api/files?limit=2&page=1

Get all of your files. You can also search by name.

Parámetro	Descripción
name	(optional) Search for a file by name
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/files?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/files?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/files?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "result": 3,
    "perpage": 15,
    "currentpage": 1,
    "nextpage": null,
    "maxpage": 1,
    "list": [
        {
            "id": 1,
            "name": "My Photo",
            "downloads": 10,
            "shorturl": "https:\/\/go2my.info\/dQbar",
            "date": "2022-08-09 17:00:00"
        },
        {
            "id": 2,
            "name": "My Documents",
            "downloads": 15,
            "shorturl": "https:\/\/go2my.info\/iNniH",
            "date": "2022-08-10 17:01:00"
        },
        {
            "id": 3,
            "name": "My Files",
            "downloads": 5,
            "shorturl": "https:\/\/go2my.info\/OnRHR",
            "date": "2022-08-11 19:01:00"
        }
    ]
}

Upload a file

POST https://go2my.info/api/files/upload/:filename?name=My+File

Upload a file by sending the binary data as the post body. You need to send the file name including the extension instead of :filename in the url (e.g. brandkit.zip). You can set options by sending the following parameters.

Parámetro	Descripción
name	(optional) File name
custom	(optional) Custom alias instead of random alias.
domain	(optional) Custom Domain
password	(optional) Password protection
expiry	(optional) Expiration for the download example 2021-09-28
maxdownloads	(optional) Maximum number of downloads

cURL PHP Node.js

curl --location --request POST 'https://go2my.info/api/files/upload/:filename?name=My+File' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '"BINARY DATA"'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/files/upload/:filename?name=My+File",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode('BINARY DATA'),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://go2my.info/api/files/upload/:filename?name=My+File',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify("BINARY DATA"),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 1,
    "shorturl": "https:\/\/go2my.info\/PqdvV"
}

Personalizar página de bienvenida

List Custom Splash

GET https://go2my.info/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/splash?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Pixels

List Pixels

GET https://go2my.info/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/pixels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Create a Pixel

POST https://go2my.info/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

Parámetro	Descripción
type	(required) gtmpixel \| gapixel \| fbpixel \| adwordspixel \| linkedinpixel \| twitterpixel \| adrollpixel \| quorapixel \| pinterest \| bing \| snapchat \| reddit \| tiktok
name	(required) Custom name for your pixel
tag	(required) The tag for the pixel

cURL PHP Node.js

curl --location --request POST 'https://go2my.info/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'gtmpixel',
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://go2my.info/api/pixel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "id": 1
}

Actualizar píxel

PUT https://go2my.info/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

Parámetro	Descripción
name	(optional) Custom name for your pixel
tag	(required) The tag for the pixel

cURL PHP Node.js

curl --location --request PUT 'https://go2my.info/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://go2my.info/api/pixel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Pixel has been updated successfully."
}

Delete Pixel

DELETE https://go2my.info/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

cURL PHP Node.js

curl --location --request DELETE 'https://go2my.info/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://go2my.info/api/pixel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

Superposiciones de CTA

List CTA Overlays

GET https://go2my.info/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

Parámetro	Descripción
limit	(optional) Per page data result
page	(optional) Current page request

cURL PHP Node.js

curl --location --request GET 'https://go2my.info/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \

$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://go2my.info/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;

var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://go2my.info/api/overlay?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});

Respuesta del servidor

{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Recursos

Soluciones

Referencia de API para desarrolladores v3

Empezando

Autenticación

Límite de tarifa

Manejo de respuestas

Campañas

List Campaigns

Respuesta del servidor

Crear una campaña

Respuesta del servidor

Assign a Link to a Campaign

Respuesta del servidor

Actualizar campaña

Respuesta del servidor

Delete Campaign

Respuesta del servidor

Canales

List Channels

Respuesta del servidor

List Channel Items

Respuesta del servidor

Crear un canal

Respuesta del servidor

Assign an Item to a Channel

Respuesta del servidor

Actualizar canal

Respuesta del servidor

Delete Channel

Respuesta del servidor

Cuenta

Obtener cuenta

Respuesta del servidor

Actualizar cuenta

Respuesta del servidor

Códigos QR

List QR codes

Respuesta del servidor

Obtenga un solo código QR

Respuesta del servidor

Crear un código QR

Respuesta del servidor

Update QR Code

Respuesta del servidor

Eliminar un código QR

Respuesta del servidor

Dominios de marca

List Branded Domains

Respuesta del servidor

Create a Branded Domain

Respuesta del servidor

Actualizar dominio

Respuesta del servidor

Delete Domain

Respuesta del servidor

Enlaces

List Links

Respuesta del servidor

Get a Single Link

Respuesta del servidor

acortar un enlace

Respuesta del servidor

Actualizar enlace

Respuesta del servidor

Eliminar un enlace

Respuesta del servidor

Files

List Files

Respuesta del servidor

Upload a file

Respuesta del servidor

Personalizar página de bienvenida

List Custom Splash

Respuesta del servidor

Pixels

List Pixels

Respuesta del servidor

Create a Pixel

Respuesta del servidor